2020.1環境で作成したLinuxは上手く起動できなかったので、
2019.2環境で再チャレンジ。
今回参考にしたのは、basaro_kさんの以下のサイト。
https://qiita.com/basaro_k/items/6841c99c39ff12851847
このサイト通りの手順で、正常にLinux起動した。
ブートログ
全ブートログ
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 |
Xilinx Zynq MP First Stage Boot Loader Release 2019.2 Aug 10 2020 - 16:58:42 NOTICE: ATF running on XCZU3EG/silicon v4/RTL5.1 at 0xfffea000 NOTICE: BL31: Secure code at 0x0 NOTICE: BL31: Non secure code at 0x8000000 NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9 NOTICE: BL31: Built : 16:58:59, Aug 10 2020 PMUFW: v1.1 U-Boot 2019.01 (Aug 10 2020 - 16:57:33 +0000) Model: Avnet Ultra96 Rev1 Board: Xilinx ZynqMP DRAM: 2 GiB EL Level: EL2 Chip ID: zu3eg MMC: mmc@ff160000: 0, mmc@ff170000: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Model: Avnet Ultra96 Rev1 Board: Xilinx ZynqMP Bootmode: SD_MODE Reset reason: EXTERNAL U-BOOT for ultra96v2_base Hit any key to stop autoboot: 0 Device: mmc@ff160000 Manufacturer ID: 3 OEM: 5344 Name: SC32G Bus Speed: 50000000 Mode : SD High Speed (50MHz) Rd Block Len: 512 SD version 3.0 High Capacity: Yes Capacity: 29.7 GiB Bus Width: 4-bit Erase Group Size: 512 Bytes 18118996 bytes read in 1310 ms (13.2 MiB/s) ## Loading kernel from FIT Image at 10000000 ... Using 'conf@system-top.dtb' configuration Trying 'kernel@1' kernel subimage Description: Linux kernel Type: Kernel Image Compression: uncompressed Data Start: 0x100000f8 Data Size: 18082304 Bytes = 17.2 MiB Architecture: AArch64 OS: Linux Load Address: 0x00080000 Entry Point: 0x00080000 Hash algo: sha1 Hash value: b31d89242f679bfbd56f94de51ddbcda6ee57400 Verifying Hash Integrity ... sha1+ OK ## Loading fdt from FIT Image at 10000000 ... Using 'conf@system-top.dtb' configuration Trying 'fdt@system-top.dtb' fdt subimage Description: Flattened Device Tree blob Type: Flat Device Tree Compression: uncompressed Data Start: 0x1113ebfc Data Size: 34785 Bytes = 34 KiB Architecture: AArch64 Hash algo: sha1 Hash value: d7dfef6cecce599f71d700125fb0d21f40835642 Verifying Hash Integrity ... sha1+ OK Booting using the fdt blob at 0x1113ebfc Loading Kernel Image ... OK Loading Device Tree to 0000000007ff4000, end 0000000007fff7e0 ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.0-xilinx-v2019.2 (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP Mon Aug 10 16:56:00 UTC 2020 [ 0.000000] Machine model: Avnet Ultra96 Rev1 [ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8') [ 0.000000] bootconsole [cdns0] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 1024 MiB at 0x000000003fc00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3f8 with crng_init=0 [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s53656 r8192 d32360 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516867 [ 0.000000] Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 997200K/2096128K available (10748K kernel code, 634K rwdata, 5424K rodata, 832K init, 314K bss, 50352K reserved, 1048576K cma-reserved) [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns [ 0.000004] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns [ 0.008372] Console: colour dummy device 80x25 [ 0.012490] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000) [ 0.022840] pid_max: default: 32768 minimum: 301 [ 0.027567] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.034097] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.042283] ASID allocator initialised with 32768 entries [ 0.046603] rcu: Hierarchical SRCU implementation. [ 0.051608] EFI services will not be available. [ 0.055949] smp: Bringing up secondary CPUs ... [ 0.060652] Detected VIPT I-cache on CPU1 [ 0.060698] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.061074] Detected VIPT I-cache on CPU2 [ 0.061095] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.061428] Detected VIPT I-cache on CPU3 [ 0.061448] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.061493] smp: Brought up 1 node, 4 CPUs [ 0.095756] SMP: Total of 4 processors activated. [ 0.100430] CPU features: detected: 32-bit EL0 Support [ 0.108508] CPU: All CPU(s) started at EL2 [ 0.109612] alternatives: patching kernel code [ 0.115598] devtmpfs: initialized [ 0.121610] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.126999] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.167151] xor: measuring software checksum speed [ 0.205465] 8regs : 2375.000 MB/sec [ 0.245491] 8regs_prefetch: 2052.000 MB/sec [ 0.285521] 32regs : 2725.000 MB/sec [ 0.325550] 32regs_prefetch: 2309.000 MB/sec [ 0.325594] xor: using function: 32regs (2725.000 MB/sec) [ 0.329902] pinctrl core: initialized pinctrl subsystem [ 0.336234] NET: Registered protocol family 16 [ 0.339919] audit: initializing netlink subsys (disabled) [ 0.344976] audit: type=2000 audit(0.292:1): state=initialized audit_enabled=0 res=1 [ 0.352578] cpuidle: using governor menu [ 0.356619] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____)) [ 0.363799] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.371499] DMA: preallocated 256 KiB pool for atomic allocations [ 0.393974] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.463350] raid6: int64x1 gen() 445 MB/s [ 0.531358] raid6: int64x1 xor() 449 MB/s [ 0.599407] raid6: int64x2 gen() 683 MB/s [ 0.667419] raid6: int64x2 xor() 598 MB/s [ 0.735491] raid6: int64x4 gen() 980 MB/s [ 0.803533] raid6: int64x4 xor() 736 MB/s [ 0.871569] raid6: int64x8 gen() 1166 MB/s [ 0.939633] raid6: int64x8 xor() 759 MB/s [ 1.007660] raid6: neonx1 gen() 736 MB/s [ 1.075699] raid6: neonx1 xor() 878 MB/s [ 1.143747] raid6: neonx2 gen() 1130 MB/s [ 1.211804] raid6: neonx2 xor() 1172 MB/s [ 1.279855] raid6: neonx4 gen() 1483 MB/s [ 1.347876] raid6: neonx4 xor() 1416 MB/s [ 1.415922] raid6: neonx8 gen() 1541 MB/s [ 1.483969] raid6: neonx8 xor() 1459 MB/s [ 1.484011] raid6: using algorithm neonx8 gen() 1541 MB/s [ 1.487965] raid6: .... xor() 1459 MB/s, rmw enabled [ 1.492896] raid6: using neon recovery algorithm [ 1.498868] SCSI subsystem initialized [ 1.501511] usbcore: registered new interface driver usbfs [ 1.506685] usbcore: registered new interface driver hub [ 1.511972] usbcore: registered new device driver usb [ 1.517026] media: Linux media interface: v0.10 [ 1.521467] videodev: Linux video capture interface: v2.00 [ 1.526922] pps_core: LinuxPPS API ver. 1 registered [ 1.531821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.540916] PTP clock support registered [ 1.544821] EDAC MC: Ver: 3.0.0 [ 1.548504] zynqmp-ipi-mbox mailbox@ff990400: Probed ZynqMP IPI Mailbox driver. [ 1.555499] FPGA manager framework [ 1.558784] Advanced Linux Sound Architecture Driver Initialized. [ 1.565032] Bluetooth: Core ver 2.22 [ 1.568172] NET: Registered protocol family 31 [ 1.572564] Bluetooth: HCI device and connection manager initialized [ 1.578882] Bluetooth: HCI socket layer initialized [ 1.583724] Bluetooth: L2CAP socket layer initialized [ 1.588754] Bluetooth: SCO socket layer initialized [ 1.594086] clocksource: Switched to clocksource arch_sys_counter [ 1.599904] VFS: Disk quotas dquot_6.6.0 [ 1.603589] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.615971] NET: Registered protocol family 2 [ 1.616569] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes) [ 1.622517] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 1.629781] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.636763] TCP: Hash tables configured (established 16384 bind 16384) [ 1.642853] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.648731] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.655247] NET: Registered protocol family 1 [ 1.659746] RPC: Registered named UNIX socket transport module. [ 1.665305] RPC: Registered udp transport module. [ 1.669975] RPC: Registered tcp transport module. [ 1.674642] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.682025] hw perfevents: no interrupt-affinity property for /pmu, guessing. [ 1.688344] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.697053] Initialise system trusted keyrings [ 1.700356] workingset: timestamp_bits=62 max_order=19 bucket_order=0 [ 1.707606] NFS: Registering the id_resolver key type [ 1.711679] Key type id_resolver registered [ 1.715817] Key type id_legacy registered [ 1.719803] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.726472] jffs2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc. [ 2.814796] NET: Registered protocol family 38 [ 2.872978] Key type asymmetric registered [ 2.873022] Asymmetric key parser 'x509' registered [ 2.876343] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.883640] io scheduler noop registered [ 2.887528] io scheduler deadline registered [ 2.891793] io scheduler cfq registered (default) [ 2.896439] io scheduler mq-deadline registered [ 2.900936] io scheduler kyber registered [ 2.942062] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.946690] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 2.955117] brd: module loaded [ 2.961034] loop: module loaded [ 2.962235] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.966935] libphy: Fixed MDIO Bus: probed [ 2.970913] tun: Universal TUN/TAP device driver, 1.6 [ 2.974249] CAN device driver interface [ 2.978982] usbcore: registered new interface driver asix [ 2.983260] usbcore: registered new interface driver ax88179_178a [ 2.989288] usbcore: registered new interface driver cdc_ether [ 2.995082] usbcore: registered new interface driver net1080 [ 3.000706] usbcore: registered new interface driver cdc_subset [ 3.006586] usbcore: registered new interface driver zaurus [ 3.012133] usbcore: registered new interface driver cdc_ncm [ 3.018381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.024209] ehci-pci: EHCI PCI platform driver [ 3.028916] usbcore: registered new interface driver uas [ 3.033934] usbcore: registered new interface driver usb-storage [ 3.040581] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0 [ 3.047119] i2c /dev entries driver [ 3.052215] usbcore: registered new interface driver uvcvideo [ 3.056212] USB Video Class driver (1.1.1) [ 3.061344] Bluetooth: HCI UART driver ver 2.3 [ 3.064695] Bluetooth: HCI UART protocol H4 registered [ 3.069791] Bluetooth: HCI UART protocol BCSP registered [ 3.075096] Bluetooth: HCI UART protocol LL registered [ 3.080172] Bluetooth: HCI UART protocol ATH3K registered [ 3.085555] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 3.091815] Bluetooth: HCI UART protocol Intel registered [ 3.097146] Bluetooth: HCI UART protocol QCA registered [ 3.102358] usbcore: registered new interface driver bcm203x [ 3.107971] usbcore: registered new interface driver bpa10x [ 3.113507] usbcore: registered new interface driver bfusb [ 3.118954] usbcore: registered new interface driver btusb [ 3.124374] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 3.130058] usbcore: registered new interface driver ath3k [ 3.135610] EDAC MC: ECC not enabled [ 3.139434] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT) [ 3.152112] sdhci: Secure Digital Host Controller Interface driver [ 3.157245] sdhci: Copyright(c) Pierre Ossman [ 3.161568] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.167610] ledtrig-cpu: registered to indicate activity on CPUs [ 3.173215] zynqmp_firmware_probe Platform Management API v1.1 [ 3.178959] zynqmp_firmware_probe Trustzone version v1.0 [ 3.187494] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl initialized [ 3.215202] zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt, ret = -22 [ 3.218084] alg: No test for xilinx-zynqmp-aes (zynqmp-aes) [ 3.223035] zynqmp_aes zynqmp_aes: AES Successfully Registered [ 3.223035] [ 3.230618] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384) [ 3.236861] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa) [ 3.242353] usbcore: registered new interface driver usbhid [ 3.247567] usbhid: USB HID core driver [ 3.253949] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered [ 3.258242] usbcore: registered new interface driver snd-usb-audio [ 3.265004] pktgen: Packet Generator for packet performance testing. Version: 2.75 [ 3.271995] Initializing XFRM netlink socket [ 3.275801] NET: Registered protocol family 10 [ 3.280598] Segment Routing with IPv6 [ 3.283856] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.290096] NET: Registered protocol family 17 [ 3.294020] NET: Registered protocol family 15 [ 3.298449] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 3.311379] can: controller area network core (rev 20170425 abi 9) [ 3.317510] NET: Registered protocol family 29 [ 3.321872] can: raw protocol (rev 20170425) [ 3.326109] can: broadcast manager protocol (rev 20170425 t) [ 3.331735] can: netlink gateway (rev 20170425) max_hops=1 [ 3.337264] Bluetooth: RFCOMM TTY layer initialized [ 3.342033] Bluetooth: RFCOMM socket layer initialized [ 3.347153] Bluetooth: RFCOMM ver 1.11 [ 3.350852] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.356123] Bluetooth: BNEP filters: protocol multicast [ 3.361317] Bluetooth: BNEP socket layer initialized [ 3.366244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.372128] Bluetooth: HIDP socket layer initialized [ 3.377231] 9pnet: Installing 9P2000 support [ 3.381324] Key type dns_resolver registered [ 3.386141] registered taskstats version 1 [ 3.389594] Loading compiled-in X.509 certificates [ 3.394789] Btrfs loaded, crc32c=crc32c-generic [ 3.407416] ff000000.serial: ttyPS1 at MMIO 0xff000000 (irq = 40, base_baud = 6249999) is a xuartps [ 3.411071] serial serial0: tty port ttyPS0 registered [ 3.416173] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 41, base_baud = 6249999) is a xuartps [ 3.430986] console [ttyPS0] enabled [ 3.430986] console [ttyPS0] enabled [ 3.434585] bootconsole [cdns0] disabled [ 3.434585] bootconsole [cdns0] disabled [ 3.442933] of-fpga-region fpga-full: FPGA Region probed [ 3.452424] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed [ 3.459043] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success [ 3.466184] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success [ 3.473305] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success [ 3.480433] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success [ 3.487560] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success [ 3.494687] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success [ 3.501811] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success [ 3.508938] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success [ 3.516147] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success [ 3.523266] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success [ 3.530398] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success [ 3.537519] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success [ 3.544652] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success [ 3.551770] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success [ 3.558906] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success [ 3.566042] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success [ 3.573445] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_locked:yes [ 3.584723] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Xilinx DisplayPort Sound Codec probed [ 3.595518] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed [ 3.603583] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed [ 3.612565] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok [ 3.625038] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: xilinx-dp-snd-codec-dai <-> xilinx-dp-snd-codec-dai mapping ok [ 3.637848] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: Xilinx DisplayPort Sound Card probed [ 3.648067] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000 [ 3.655115] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.661727] [drm] No driver support for vblank timestamp query. [ 3.667735] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff8008bbeb78) [ 4.754104] [drm] Cannot find any crtc or sizes [ 4.758934] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 0 [ 4.767046] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsystem driver probed [ 4.777401] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM [ 4.783950] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM [ 4.790462] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM [ 4.796985] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM [ 4.804007] dwc3 fe200000.dwc3: Failed to get clk 'ref': -2 [ 4.810051] xilinx-psgtr fd400000.zynqmp_phy: Lane:2 type:0 protocol:3 pll_locked:yes [ 4.822103] dwc3 fe300000.dwc3: Failed to get clk 'ref': -2 [ 4.828021] xilinx-psgtr fd400000.zynqmp_phy: Lane:3 type:1 protocol:3 pll_locked:yes [ 4.838308] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.843805] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 4.851841] xhci-hcd xhci-hcd.0.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000202010010 [ 4.861273] xhci-hcd xhci-hcd.0.auto: irq 50, io mem 0xfe300000 [ 4.867462] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 4.875724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.882955] usb usb1: Product: xHCI Host Controller [ 4.887831] usb usb1: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd [ 4.894521] usb usb1: SerialNumber: xhci-hcd.0.auto [ 4.899790] hub 1-0:1.0: USB hub found [ 4.903559] hub 1-0:1.0: 1 port detected [ 4.907703] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 4.913192] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 4.920848] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 4.927500] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.935681] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 4.943939] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.951158] usb usb2: Product: xHCI Host Controller [ 4.956026] usb usb2: Manufacturer: Linux 4.19.0-xilinx-v2019.2 xhci-hcd [ 4.962719] usb usb2: SerialNumber: xhci-hcd.0.auto [ 4.967865] hub 2-0:1.0: USB hub found [ 4.971631] hub 2-0:1.0: 1 port detected [ 4.977599] i2c i2c-0: Added multiplexed i2c bus 2 [ 4.982531] i2c i2c-0: Added multiplexed i2c bus 3 [ 4.987465] i2c i2c-0: Added multiplexed i2c bus 4 [ 4.992393] i2c i2c-0: Added multiplexed i2c bus 5 [ 4.997915] tps65086 6-005e: Failed to read revision register [ 5.003753] i2c i2c-0: Added multiplexed i2c bus 6 [ 5.009176] ina2xx 7-0040: error configuring the device: -6 [ 5.014784] i2c i2c-0: Added multiplexed i2c bus 7 [ 5.019719] i2c i2c-0: Added multiplexed i2c bus 8 [ 5.024653] i2c i2c-0: Added multiplexed i2c bus 9 [ 5.029442] pca954x 0-0075: registered 8 multiplexed busses for I2C switch pca9548 [ 5.037034] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 30 [ 5.043917] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s [ 5.051416] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s [ 5.090093] mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit [ 5.103940] sdhci-arasan ff170000.mmc: allocated mmc-pwrseq [ 5.109591] sdhci-arasan ff170000.mmc: Linked as a consumer to regulator.1 [ 5.146099] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit [ 5.163767] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 5.170936] rtc_zynqmp ffa60000.rtc: setting system clock to 1970-01-01 00:00:08 UTC (8) [ 5.176678] mmc0: new high speed SDHC card at address aaaa [ 5.179024] of_cfs_init [ 5.185396] mmcblk0: mmc0:aaaa SC32G 29.7 GiB [ 5.186990] of_cfs_init: OK [ 5.194307] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 5.196204] mmcblk0: p1 p2 [ 5.211937] mmc1: new high speed SDIO card at address 0001 [ 5.333696] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 5.334095] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 5.340250] clk: Not disabling unused clocks [ 5.351011] ALSA device list: [ 5.353963] #0: DisplayPort monitor [ 5.358127] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 5.366737] cfg80211: failed to load regulatory.db [ 5.409555] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.417676] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.429125] devtmpfs: mounted [ 5.432452] Freeing unused kernel memory: 832K [ 5.436936] Run /sbin/init as init process [ 5.495041] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.05 [ 5.503228] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.510364] usb 1-1: Product: USB2744 [ 5.514012] usb 1-1: Manufacturer: Microchip Tech INIT: version 2.88 booting[ 5.567694] hub 1-1:1.0: USB hub found [ 5.571673] hub 1-1:1.0: 4 ports detected [ 5.598171] random: fast init done [ 5.631682] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 5.658483] usb 2-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.05 [ 5.666670] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0 [ 5.673798] usb 2-1: Product: USB5744 [ 5.677450] usb 2-1: Manufacturer: Microchip Tech [ 5.711728] hub 2-1:1.0: USB hub found [ 5.715524] hub 2-1:1.0: 3 ports detected [ 5.874163] [drm] Cannot find any crtc or sizes Starting udev [ 5.882171] Bluetooth: hci0: Failed to get CTS [ 5.930137] usb 1-1.4: new high-speed USB device number 3 using xhci-hcd [ 6.018014] udevd[1826]: starting version 3.2.5 [ 6.028951] random: udevd: uninitialized urandom read (16 bytes read) [ 6.035114] usb 1-1.4: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00 [ 6.036141] random: udevd: uninitialized urandom read (16 bytes read) [ 6.043726] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.043730] usb 1-1.4: Product: Hub Controller [ 6.052907] random: udevd: uninitialized urandom read (16 bytes read) [ 6.057459] usb 1-1.4: Manufacturer: Microchip Tech [ 6.116315] udevd[1827]: starting eudev-3.2.5 [ 6.198710] zocl: loading out-of-tree module taints kernel. [ 6.209532] [drm] Probing for xlnx,zocl [ 6.213798] [drm] FPGA programming device pcap founded. [ 6.219091] [drm] PR Isolation addr 0x0 [ 6.242857] [drm] Initialized zocl 2018.2.1 20180313 for amba:zyxclmm_drm on minor 1 [ 6.853375] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) Mon Aug 10 17:20:48 UTC 2020 [ 7.605759] urandom_read: 4 callbacks suppressed [ 7.605766] random: dd: uninitialized urandom read (512 bytes read) Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-xrt... [ 9.490497] INFO: Creating ICD entry for Xilinx Platform Running postinst /etc/rpm-postinsts/101-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... Cannot find device "eth0" [ 9.725861] random: dbus-uuidgen: uninitialized urandom read (12 bytes read) [ 9.732949] random: dbus-uuidgen: uninitialized urandom read (8 bytes read) Starting system message bus: dbus. Starting haveged: haveged: listening socket at 3 haveged: haveged starting up Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... haveged: haveged: ver: 1.9.4; arch: generic; vend: ; build: (gcc 8.2.0 CTV); collect: 128K haveged: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 15528/64688 haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 8.00216 haveged: haveged: fills: 0, generated: 0 [ 10.631321] random: crng init done Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCW0V/C5gNIij1p8iVlbL3axo+bxIfV1M5pKpdGDG4+FjDyB51ZWzb5lKB9ESUCajEwYXpNglbAgURDACE4FMUlga56wNo4Kkt6QYthoIB9CgpThlY/RMXVzciuFwyNJ4q1j9YguMsDashGcDN7pPrwvhFEIA5F8OEEXkRNXOPl3Hs0OxWGYkXeFEyevlo6SthIx0w2qifMpdWcUrOlJoPJ57qTNSMW9xbDPR5FovHusBYckxe3atACmfeYjj1NeYKJfhBTlWI76a2knticpcQzKH/OS7IEJJE0OREsX3oxqIzqmezVRFN/PQPhNb5bpNia6o9e6h3ZspAVJ/+p3TaB root@ultra96v2_base Fingerprint: sha1!! e8:98:e4:7f:4a:d7:e6:46:b4:2a:18:3a:ca:a3:de:e5:c0:aa:dc:cd dropbear. Starting internet superserver: inetd. Starting syslogd/klogd: done Starting tcf-agent: OK PetaLinux 2019.2 ultra96v2_base /dev/ttyPS0 ultra96v2_base login: |
Hello world実行
上記サイトではログが貼ってなかったので、貼っておく。
|
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 |
root@ultra96v2_base:~# cd /run/media/mmcblk0p1/ root@ultra96v2_base:/run/media/mmcblk0p1# export XILINX_XRT=/usr root@ultra96v2_base:/run/media/mmcblk0p1# ./Hello_world.exe vadd.xclbin [ 783.758296] [drm] Pid 2318 opened device [ 783.762262] [drm] Pid 2318 closed device [ 783.778233] [drm] Pid 2318 opened device Found Platform Platform Name: Xilinx INFO: Reading vadd.xclbin Loading: 'vadd.xclbin' Trying to program device[0]: edge [ 784.051370] [drm] Finding IP_LAYOUT section header [ 784.051385] [drm] Section IP_LAYOUT details: [ 784.056202] [drm] offset = 0x54fcf8 [ 784.060467] [drm] size = 0x58 [ 784.064339] [drm] Finding DEBUG_IP_LAYOUT section header [ 784.067473] [drm] AXLF section DEBUG_IP_LAYOUT header not found [ 784.072779] [drm] Finding CONNECTIVITY section header [ 784.078694] [drm] Section CONNECTIVITY details: [ 784.083736] [drm] offset = 0x54fd50 [ 784.088268] [drm] size = 0x28 [ 784.091936] [drm] Finding MEM_TOPOLOGY section header [ 784.095074] [drm] Section MEM_TOPOLOGY details: [ 784.100115] [drm] offset = 0x54fc00 [ 784.104638] [drm] size = 0xf8 [ 784.113453] [drm] No ERT scheduler on MPSoC, using KDS [ 784.122332] [drm] Fail to install CU 0 interrupt handler: -22. Fall back to polling mode. [ 784.130498] [drm] scheduler config ert(0) [ 784.130500] [drm] cus(1) [ 784.134499] [drm] slots(16) [ 784.137190] [drm] num_cu_masks(1) [ 784.140149] [drm] cu_shift(16) [ 784.143628] [drm] cu_base(0xa0000000) Device[0]: program successful! [ 784.146850] [drm] polling(1) [ 784.158564] [drm] User buffer is not physical contiguous TEST PASSED [ 784.166916] [drm] zocl_free_userptr_bo: obj 0x000000001b469968 [ 784.170771] [drm] zocl_free_userptr_bo: obj 0x00000000683206bc [ 784.176683] [drm] zocl_free_userptr_bo: obj 0x00000000f7d8d202 [ 784.185786] [drm] Pid 2318 closed device |
色々エラーは吐き出されているけど、TEST PASSEDしてる。